Pin It
Prompt Painters Background
561-425-6663
info@promptpainters.com

Simple Steps To Stain Your Deck

If you want to avoid being dissatisfied with your deck staining, you need to know what to do and how to do it. It can be difficult for an amateur to know all the right steps to take to ensure professional results. The good news is, with the steps here, you will find staining your deck is not as difficult as you may have thought and the process can be completed by virtually any homeowner.

7 Steps To A New Deck

Step 1: Don’t Rush

Regardless of what step of the staining job you are on, you need to be patient. Be sure you take time to allow the new pressure treated deck boards to weather for several months and fully dry prior to staining it. Also, leave the stain strippers on the deck’s surface for the right amount of time in order to successfully break down an old finish prior to rinsing it off. You also need to take your time to avoid spills and over spray on other surfaces. Being patient and not rushing the process is essential to achieve professional results.

Step 2: Preparation

Regardless of the type of wood your deck is made of, it should be cleaned well prior to being stained. New lumber has to be cleaned in order to remove the ‘mill scale’ which is when the grain is crushed during the actual milling process. If it is not cleaned, it may prevent the stain from penetrating the pores in the wood properly.

Older decks need to be cleaned to remove old stains, mildew, gray coloring from the sun and dirt. Consider using an oxygen bleach wood cleaner since they can effectively clean the wood without harming surrounding vegetation.

Step 3: Consider Using a Brightener

Use a brightener during the actual process of staining a deck, this is the most skipped step. However, it is one of the easiest steps that can have a huge impact on the results that are achieved. Wood brighteners will open the surface of the deck boards to help improve penetration of the stain, neutralize any remnants of stain strippers and restore the appearance of weathered wood so that it appears new once again.

Step 4: Rinse, Rinse, Rinse

Any time cleaning chemicals are used, they need to be followed by lots of water. While some of the chemicals may seem to be harmless and safe, they have to be rinsed well after use. If they are left in or on the wood they can resurface as time passes and start to attack the new stain you have applied, breaking it down and causing it to look worn.

Step 5: Avoid Cheap Products

Once your deck is completely clean and dry, it will be ready to begin the staining process. Prior to purchasing a stain, you need to remember ‘you get what you pay for.’ Better quality and better ingredients will naturally cost more. If you want premium, professional results, you will have to purchase a quality product. See some product reviews here.

Step 6: Follow the Directions

Each staining product is different, which means it is essential for you to carefully read the directions on the can. It will only take a short amount of time to ensure you know what to do and how to do it. Be sure to read carefully how many coats should be applied, how long you should wait in between the coats and how long you need to wait to apply after you have cleaned the deck. Make sure to read the can’s label first in order to achieve professional results the first time.

Step 7: The Paint Brush should Not be Overlooked

There are a number of ways to apply your deck stain. You can use a roller or a garden sprayer, which are both
popular options. However, regardless of the way you apply the stain, be sure to have a good, old-fashioned paint brush handy. The paint brush will help to work the chosen stain deeper into the board’s pores. Also, the friction and
agitation from the paint brush can help the wood absorb more of the stain.

Get The Professional Look

When you follow the tips here, you will find that the results you get will look professional. Take your time and be sure to provide the proper maintenance for the deck to keep the high quality, professional look as long as possible.